When purchasing a fiber laser cutting machine, you must check the cutting precision, which can basically be controlled between 0.1 mm and 0.2 mm. In the actual cutting process, the smoothness of the cutting surface is also very important. You must check whether there are some burrs on the cutting surface. Generally speaking, there will be some burrs, which are basically determined by the cutting thickness or the gas used. There will be no burrs below three millimeters. Nitrogen is better, and oxygen is second. If there is air inside, the effect is also poor.
There are certain selection criteria for fiber laser cutting machines during the entire selection process. If you choose this type of equipment, you must determine the production range and make effective choices based on the processing material or the thickness of the cut. Only in this way can you determine the number of purchased equipment or the relevant machine model, and lay the foundation for subsequent procurement work. Professional fiber laser cutting machines have relatively few burrs, or even no burrs, and the cut surface is very smooth.
Most manufacturers have their own power requirements for laser cutting machines and other equipment. From the existing situation, most factories cut metal plates below six millimeters, so there is no need to buy high-power cutting machines. It depends on the degree of material deformation. If a fiber laser cutting machine is used for cutting, the material deformation effect of good equipment is very small.